News

Set up the high pressure mercury lamp wiring, have to be identify from your external high pressure mercury ballast forms,sefl-ballast or not. High pressure mercury lamp ballast, ballast electrical power has to be with high pressure mercury lamp energy, we ought to install the ballast while in the vicinity in the fixture body cannot touch the place, and it is effective for the heat dissipation along with the rain.

Self ballasted type high pressure mercury lamp ballast isn't going to have access. High pressure mercury lamp within a vertically installed, it can be a good idea, when installed horizontally, the luminous flux output (brightness) to cut back 7%, and easy to self destruct. The glass shell is large temperature high pressure mercury lamp radiation has to be put in so great. Otherwise it is going to affect the effectiveness and lifestyle of your lamp. Outside the glass shell on the high pressure mercury lamp broken can still shine, when looked in the ultraviolet radiation, harmful to the human physique. So HPML broken glass shell must be replaced quickly.

The provide voltage on the high pressure mercury lamp needs to be stored steady. When the voltage is decreased by 5% lights could be suicide, and re begin burning to get a long time, so high pressure mercury lamp does not right during the electrical power fluctuations greater lines. Otherwise, needs to be taken into consideration to change the strain or voltage regulators.