Tips to install the indoor lighting fixtures as below:
A). If there are many chandelier lamp, according to the design drawings and installation location. Ceiling as steel keel gypsum board fireproof material when opening direct installation of lamps, wooden structure ceiling must in turn on the light hole for fire insulation
B). Wall lamp, floor lamp, bedside lamp installed in the lamp holder bottom opening height from the ground 1800mm, 300mm, 400mm
C). The lamp, lamp power supply socket application. 2400mm the following metal shell must be well grounded in the protection of 6 lighting lamps should be separately installed switches, combined lamps can be grouped under control, according to the need to install a dual control switch.
D). Bulb capacity is lower than 100W, available plastic cap, 100W and moisture-proof closed type porcelain lamp lamp
E). The lamp is grounded in the protection of the lamp. The lamp is to be grounded and the washer and spring washer are pressed.
F). All kinds of lamps and lanterns when installed in the flammable parts, must be well ventilated and well prepared for fire heat insulation
G). When the fluorescent lamp (fluorescent lamp) is dark, the accessories shall be installed in the position to be maintained and maintained.
H). Ordinary ceiling lamp with soft conductor and its suspension, apply only to the weight of the lamp below 1kg, greater than 1kg lamps should be the chain
I). Light steel keel ceiling mounted luminaire, cannot make the light steel keel load, where the weight of a lamp in less than 3kg who must be installed on the main keel, 3kg and 3kg must be pre buried iron piece is fixed.