News

The induction lamps is made of High frequency generator, coupler and light bulb.

a)High frequency generator:

Frequent exacerbations for secondary include oscillators, filters, the group as a whole, switch parts, matching networks, driving coil and arc equivalent pathway. It requires a high frequency energy to stimulate and keep the gas tip discharge in the light bulb. The high frequency generator must have a very solid, oscillating source and a filter path, which has a high power factor and a low harmonic content.

All electronic parts are mounted in a aluminum power box, which has double properties: barrier radio frequency interference and stop heat propagation, to guarantee electronic parts of the short-lived life. The frequency of the high frequency generator is 2.65MHz. Each kind of high frequency generator must be combined with the same type of lamp and the mesh. If violates a fundamental principle, the component will destroy the lamp or the occurrence of electromagnetic interference.

The high frequency coupler is energy from the generator to the latitude circle light bulb in meshing parts. It consists of magnetic core, low temperature, electric rod, winding frame, base, transition part and coaxial wire. The action of magnetic core and low temperature is a high frequency electric field. After two conductive rods, the necessary heat and the tip of the coil are spread through the aluminum base. The base has two properties: one is to protect the electric light bulb and the engagement of the engagement; two is the necessary heat transfer to the heat sink, a heat sink must be a whole. After screw and lamp heat sink connection.

Through the coaxial wire to make the mesh and the high-frequency generator connected. Coaxial wire and mesh flow connection, and the high-frequency generator can be assembled by the screw, the method is easy to connect with the lamp. Copper heat conductive rod extends to the core of electric lighting for ferrite core cooling, is winding frame has two layers of low temperature line coil: layer walks DC, another layer of entanglement is senior coil, but as long as a head and is connected with a coil, so the second coil magnetic field all to eliminate the occurrence of the first coil magnetic field, after the form enable public terminal voltage trouble down to a lower value.

c) a light bulb is mainly a glass bulb, secondary by coated with protective film and trichromatic fluorescent powder foam shell, tube, amalgam, auxiliary amalgam and lantern composition, external charging a low-pressure mercury and an inert buffer gas, is at two ends of the electric lighting is a glass tube, the inner tube outside is engaged. After the plastic lantern, the light bulb is connected with the clutch together. This two whole device is normal as long as it is necessary, because it is a short-lived lamp, the device is on the lamp, there is no need to assemble. But sometimes (similar: the task or later, need to change the color of the lamp), electric light bulb also needs to be removed from the mesh, but must be cautious.

Induction daylight lamp has two amalgam, main amalgam is located bubble at the bottom of the shell tube, once the lamp stable task it needs the mercury atoms. Help is an online use of indium amalgam close to the cavity, and the indium net and tip electric contact. Once Mercury back quickly from the steam assisted amalgam back, is 10s can make the lamp light to input 80%. And when the lights are off, the indium net fast ice, the collection of the electric light bulb in the body of the mercury atom group, to prepare for the next start. The main amalgam is to ensure a wide range of optical input measurement to maintain stable. To help ensure fast input solid amalgam. Is the fluorescent powder and foam shell both coated with a layer of film, light 60000 hours after the input to maintain the characteristics of the powder is still at the beginning of the 70% inside and outside.