Sitemap |  Inquiry
NEWS
CONTACT US

News

Home » News

  • [2015-06-01]
    HID Floodlights all contain brighter bulbs than most of the lights inside your house. These bulbs usually contain a filament and a gas, such as xenon. Floodlights generally use more electricity than traditional lightbulbs. While some types offloodlights contain specialty bases that require special housings, most floodlights are built on a standard light socket that works with either a standard bulb or a floodlight. However, floodlights typically are used in recessed lighting or outdoors. Professional quality HID Flood Lights from James Lighting. Energy saving HID Lighting choices with metal halide (MH) or longer lasting high pressure sodium (HPS) light sources . Traditional, shoe box, or curved back specification grade HID Lights with swiveling arm, trunnion, slipfitter or wall mounts. Factory installed photocell optional on most models. Hood, shield, and wire guard accessories for your HID Light can be ordered separately. Metal Halide outdoor flood light fixtures are available in 50W, 70W, 100W, 150W, 200W, 250W, 320W, 350W, 400W, 750W and 1000W. Outdoor flood light fixtures are used for lighting parking lots, building facades, playfields, displays, signs, general security lighting or anywhere bright, economical lighting is required....
  • [2015-06-01]
    16" or 22" High Bay fixtures Aluminum: Indoor high bay fitting for use above 25'. 16" units for 250 watt Metal Halide. 22" units for 400 watt Metal Halide. Die cast aluminum housing and wiring box and semi-specular anodized aluminum refractor. Lighting Ballast and lamp supplied. HID high bay fixture with anodized aluminum high bay reflector. Use in areas that require high efficiencies and horizontal illumination with mounting heights of 20 feet and higher. Ideal for use in light manufacturing areas, storage areas and ware-house aisles.Construction Durable die-cast aluminum housing in a compact design with smooth contours and electro-statically applied white polyester powder paint. Ballast and electrical components are fully contained and heat-sinked within the housing. Steel hook with spring steel latch on removable pendant splice box is standard. Convenient side knockout entries in splice box allow for easy wiring. Hook is easily removed for conduit pendant mounting....
  • [2015-06-01]
    From the 1980s, more energy-efficient, solid-state, electronic ballasts were developed using semiconductors as the primary means to control lamp starting and operation. There are four major reasons electronic ballasts are superior to electromagnetic ballasts: Increased light output increased ¨C Electronic ballasts increase the mean lumen output of HID lamps. A 400 W metal halide lamp operated with an electronic ballast produced 15% more light output after 8,000 hours than the same lamp with an electromagnetic ballast.Use less energy to operate ¨C A typical magnetic ballast for a 400 W metal halide lamp consumes 50¨C70 W, whereas an electronic ballast consumes as little as 5¨C20 W. Lamp life is up to 30% longer ¨C Electronic ballasts keep MH lamps brighter for a longer period of time than the same lamps with magnetic ballasts, which lowers lamp replacement costs and makes them practical for high-bay, indoor applications. Provide dimming option ¨C Electronic ballasts with dimming provide additional savings when full light output is not required. Some electronic ballasts are continuously dimmable down to 50% of lamp power....
  • [2015-04-24]
    Induction lamps can replace most of conventional light sources in functional lighting fields, so its potential market size will be huge. In addition, the incandescent lamp will be phased out in many countries in the very near future, so there will be a big space for energysaving light sources development.Although LED has many years of history, it only can be used for the traffic signal, vehicle rear lights, LCD panel back-lighting, display lighting because of lower lumen efficacy, lower wattage, and less lighting fixtures accommodated. It will take a lot of time to develop large wattage model of LED in order to apply LED in the functional lighting fields...
  • [2015-04-21]
    30-500W dimmable LED Highbay lighting...
  • [2015-04-21]
    How to replace 3000w sodium lamp with led high bay...
  • [2015-03-18]
    The 120 Watt LED Low Bay Fixture is designed to replace traditional high intensity discharge (HID) lamp fixtures in industrial and other large area lighting applications. These superior quality LED High Bay Fixtures offer maximum energy savings, reduce maintenance costs, and operate at any voltage from 100~277 VAC. Limited quantity available. Price for each. Reflector Sold Separately....
  • [2015-03-13]
    250, 320, 400, 750 and 1000 watts metal halide High Bay Lights and Lighting Fixtures...
  • [2015-03-13]
    High bay and low bay lights...
  • [2015-03-03]
    Metal halide (MH) lighting is often an intimidating choice for beginning reef aquarists and DIY enthusiasts alike. This article will provide basic background information on MH lighting systems, as well as an understanding of the basic vocabulary used when talking about metal halide lights...